Like This Blog

January 3, 2011

Install Windows 7 From Your Pen Drive

  Install Windows 7 From Your Pen Drive
This guide works 100% for Vista & Windows 7. I have seen many sites/blogs that have titles “Install Vista with USB” but not fully working details. I have also seen some post's that don’t use proper commands in it. After spending many hours to type again and again, Now I am here with this 100% working guide For How to "Install Windows 7 With Your Pen Drive (Or Other 4 GB Micro SD card)".


Requirements And Thing To Do First:

@ USB Flash Drive (Minimum 4GB)
@ Windows 7 or Vista DVD "One Time Use So You Can borrow it from your Friend"

Now Follow The Steps Mentions Below to create bootable Windows 7/Vista USB drive using Borrowed DVD
 There are Two Part
IN PART FIRST:

1: Plug-in your USB drive to USB port and Format It.

2: Open Command Prompt with admin rights.
Type cmd in Start menu search box and hit on Run as administrator. (By Right Clicking Over It)
Or
Go to Start menu > All programs > Accessories, right click on Command Prompt and then select Run as administrator. Now

3: Type in the following commands in the command prompt: First type DISKPART and hit enter.

Just see the image and follow the process.


Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash drive. {In the given image on left my Flash Drive Disk no is Disk 1.}


4: Next type all the below commands one by one. Here I assume that your disk drive no is “Disk 1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.
So below are the commands you need to type and execute one by one:
SELECT DISK 1
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
After All Goes Right You See A message "DiskPart Successfully Formated the Volume" After that type
EXIT
{One more thing if you get failed in this process, Just Format your USB Drive in simple method as always do But Format it into NTFS file system.}


NOW IN PART SECOND:



1: Now  insert your borrowed Windows7/Vista DVD into the optical drive and check the drive letter of the DVD drive. My DVD drive letter is “D” and USB drive letter is “G” 
In this post I will assume that Your 
DVD drive letter is also “D” and USB drive letter is “G”


(open my computer to know more about it and change the letters).



2:Now GOTO Command Prompt in LAST step (According to me 4 Step of part first).
Now type  the following command in cmd.


   D: CD BOOT and hit enter. Where D is my DVD drive letter.

                                  CD BOOT and hit enter to see the command prompt convert into D:\boot>.

3: Now type another command 
BOOTSECT.EXE /NT60 G:


                            to insert the 
BOOTMGR compatible code
 in USB drive.



SEE IN PIC ABOVE IF ALL GOES RIGHT NOW YOU CAN BOOT WINDOWS 7 FROM YOUR USB DRIVE.





You need to change some setting in BIOS under BOOT Section. Change USB DRIVE as first boot device.








NOTE:- After First time restart within installing process JUST remove your USB drive. And let your pc do the rest.

" How to install XP from USB drive " Need Answer .......

2 comments:

Gia said...

Nice Trick, Buddy As my dvd drive of laptop is dead and i want to format it, So now i make a copy of Windows 7 from my friend pc and then i format it,

And is you have same trick for XP also? If yes publish it, As i put your blog in my bookmarks list as i find some good tips here.

Aryan said...

Nice Post Buddy if you like to earn some money on net Just inform me !!

Post a Comment

LinkWithin

Related Posts with Thumbnails

 
Design by Free WordPress Themes | Bloggerized by Lasantha - Premium Blogger Themes | cheap international calls